Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Beverly Hills, CA
A dead gate operator in Beverly Hills isn’t a project you put off until next week. It’s your security perimeter, your privacy screen, and for most homes here, the first thing a guest touches when they arrive. Gate repair in this city runs about $180 to $650 for most operator and hinge work, with heavier custom fabrications going higher. We answer the phone around the clock and we know the difference between a Flats estate gate and a hillside cantilever. Call (818) 873-5061 and you’ll get a live person who can walk you through what’s likely wrong before we even roll a truck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Beverly Hills Homeowners Choose Gatewood Fence & Gate
Beverly Hills has more custom-fabricated, motorized estate gates per square mile than anywhere else in the country. That means most gate companies in Los Angeles have never worked on the gates we see every week. Gatewood Fence & Gate is owner-operated by Hal Gatewood, and when you call about a gate that won’t open in the Trousdale Estates or a stuck slide gate on a Beverly Hills Flats driveway, the person who shows up knows what he’s looking at. Certified on LiftMaster, FAAC, BFT, and other commercial-grade brands, with on-site welding capability so your gate stays in your driveway where it belongs. The name’s on the shop and the shop’s down the road. Nobody here is passing through.
Gate Repair Services We Offer in Beverly Hills
Gate Repair
A sagging gate is almost never a bent panel. It’s a hinge post that’s drifted or a weld that’s failing under weight. We repair the post, re-weld in place, and you don’t pay for a new gate you didn’t need. Learn more about our Gate Repair in Beverly Hills.
Gate Installation
New gates in Beverly Hills are rarely off-the-shelf. They’re custom steel or wrought iron, built around the pillars and the property line, and fitted to a motor that can actually move the weight. We measure, quote, and install with the city’s permitting requirements in mind. Learn more about our Gate Installation in Beverly Hills.
Gate Motor & Opener
When a gate opener fails, the cause is usually the operator’s gearbox, a limit switch that’s drifted, or a circuit board that’s given up. We service and replace them on site. If it’s fixable, we fix it rather than selling you a new motor. Learn more about our Gate Motor & Opener in Beverly Hills.
Gate Access Control
Many Beverly Hills estates run their entry gates through Crestron or Control4, alongside cameras and intercoms. We wire the gate to the system you already have, so the gate opens when you tell it to, not when it feels like it.
Gate Parts & Welding
We stock and source hinge brackets, roller assemblies, photo-eyes, and operator arms for major brands. And we weld on-site, so a cracked hinge bracket or a snapped post mount doesn’t mean your gate leaves your driveway.
Neighborhoods We Serve in Beverly Hills
We work across all of Beverly Hills and the surrounding streets. Typical response time for a repair call in this area is usually within a few hours, depending on what we find on the phone.
- The Beverly Hills Flats - south of Santa Monica Blvd, 1920s-1950s estate gates on original stone or brick pillars
- Trousdale Estates - hillside custom builds with heavy slide gates and steep driveways
- Beverlywood - adjacent streets where Beverly Hills zoning patterns still shape the gates
- The Golden Triangle - commercial and residential entries near Wilshire and Santa Monica
- Coldwater Canyon - winding drives above Sunset with grade-fighting cantilever systems
Why Beverly Hills’s Climate & Housing Affect Gate Repair
Beverly Hills isn’t just a city with gates. It’s a city with an independent building department that inspects electrical and structural gate work under its own code, entirely separate from the City of Los Angeles. Any gate job involving a new power run or a structural change has to clear Beverly Hills inspectors, and we handle that paperwork on our end. The housing stock adds another layer. In the Flats, many estates have 70-to-100-year-old limestone, cast-stone, and brick pillars that are load-bearing and usually can’t be cored for conduit without risking the masonry. The local skill is knowing how to run low-voltage wiring cleanly along original stone faces and still pass city review. Up in the hills above Sunset, steep driveways put exceptional strain on cantilever slide gate systems, and Santa Ana wind season in the fall exerts massive lateral force on solid panel gates, wearing limit switches and gearboxes faster than flat-lot installations. Annual pre-season inspections are not an upsell here. They’re how you avoid a 2 a.m. gate failure the night of a wind event.
Pricing for Gate Repair in Beverly Hills
Most Beverly Hills gate repairs fall into these ranges. We quote before work starts and the number doesn’t change when the job’s done.
- Diagnostic visit and minor adjustment (limit switch, photo-eye alignment): $95-$135
- Hinge replacement or post re-set on a standard estate gate: $220-$480
- Circuit board or receiver replacement: $180-$420
- Operator gearbox replacement on FAAC or BFT units: $350-$750
- Full new operator for a heavy custom slide gate: $1,800-$4,200
Every estimate is written and agreed before work starts. You get $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. If you already have a written quote from another company, bring it to us for a free second opinion.
Service Area - Cities Near Beverly Hills
We work throughout Beverly Hills and the neighboring westside communities. If you’re nearby, you can explore our services in West Hollywood, Studio City, Sherman Oaks, and Santa Monica.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Beverly Hills
Most repairs in Beverly Hills run between $180 and $650, with full operator replacements on heavy custom slide gates going into the low thousands. The price is quoted and agreed before any work begins. Call (818) 873-5061 for an exact quote, and take $40 off any repair over $200.
In most Beverly Hills neighborhoods we can have someone there within a few hours for a repair call. If it’s a custom fabrication or a replacement part that needs ordering, we’ll give you a straight answer on timing instead of a vague promise. Call (818) 873-5061 and we’ll tell you what’s realistic.
Yes. Many Beverly Hills homes run their entry gates through whole-home automation platforms, and we’re used to wiring operators, sensors, and access control into those systems without breaking the integration. If the problem is on the gate side, we fix it. If it’s in the automation programming, we’ll tell you exactly what to ask your integrator.
Anything involving electrical modifications or structural work on a gate has to clear the Beverly Hills building department, which operates under its own municipal code separate from Los Angeles. We handle the permitting process for the work we do, and we won’t tell you to skip it to save a few days.
A full installation includes the gate itself (custom or spec), the operator and drive system, photo-eye sensors, safety edges where required, wiring to your power source, and any concrete or masonry work needed for the posts. The price is written up front and doesn’t change at the door. Call (818) 873-5061 for a free measure and a written estimate.
Call Gatewood Fence & Gate for Gate Repair in Beverly Hills
If your gate’s sagging, refusing to open, grinding, or dead in the driveway, call (818) 873-5061. A live person answers, day or night. We’ll tell you what we think over the phone, and you’ll get the same price in writing before the person shows up. The 90-Day Done Right Promise is on every job. If it’s not done right, we make it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills, CA.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks