Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Sherman Oaks, CA
When your gate won’t open at 7 a.m. on a workday, or it reverses halfway closed, you need someone who knows Sherman Oaks driveways and streets well enough to get there fast and diagnose it right the first time. Hal Gatewood has been fixing gates since 2001, and his crews work Sherman Oaks every day, from the flats near Ventura Boulevard up through the hillside lanes climbing toward Mulholland Drive. We answer the phone with a live person 24/7, and for most gate failures, the person standing in your driveway is someone whose name is on the shop.
You can reach us now at (818) 873-5061. No answering service, no call-center queue: a real person picks up, asks what the gate is doing, and gives you a straight answer about when we’ll be there.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Sherman Oaks Homeowners Choose Gatewood Fence & Gate
Hal Gatewood started this company in 2001 because he got tired of watching gate companies charge to replace equipment that only needed a weld, a limit switch, or a post set plumb. That repair-first mindset is still how we work. If your gate can be fixed on site, we fix it in your driveway. We don’t haul it off to a shop to run up a labor bill, and we don’t recommend replacing a motor because a capacitor failed.
Homeowners south of Ventura Boulevard and over in the areas around Van Nuys-Sherman Oaks Recreation Center call us because we understand what their properties actually deal with. A hillside driveway on a 15% grade near Dixie Canyon Avenue puts a completely different load on a swing gate operator than a flat lot off Kester Avenue. Many national companies treat both jobs the same. That’s precisely how gates end up creeping open, motors burn out early, and homeowners pay twice.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no “that’s not covered.” The name on the invoice is the same name on the shop.
Gate Repair Services We Offer in Sherman Oaks
Gate Repair
Most repair calls in Sherman Oaks come down to a gate that stopped opening or a pair of gates that won’t close square. We repair gate panels, hinge posts, wheels, tracks, chains, and the hardware that keeps everything moving. If a previous installer patched over a failing post or used undersized hinges, we’ll show you what’s there and fix the actual cause, not just the symptom. Learn more about our Gate Repair in Sherman Oaks.
Gate Installation
New gate work in Sherman Oaks often follows a teardown and rebuild, a hillside landscaping project, or a homeowner simply replacing a 1960s swing gate that’s outlived its posts. We install the gate and the operator together as one system, complete with a free measure and written price before any work starts. Learn more about our Gate Installation in Sherman Oaks.
Gate Motor & Opener
Gate motors in Sherman Oaks deal with two distinct enemies: Valley heat that throws limit switches out of calibration, and hillside grades that wreck motors sized for flat ground. We service and replace openers from LiftMaster, FAAC, BFT, and Linear, and we configure them for the actual slope and swing of your gate. Learn more about our Gate Motor & Opener in Sherman Oaks.
Gate Access Control
Keypads, remotes, intercoms, vehicle sensors, and phone-based entry systems: we install and repair them all. If your keypad works in the morning and refuses in the afternoon heat, the problem is usually a failing relay or a drifting power supply, not the keypad itself. We test the whole circuit before we replace anything.
Gate Parts & Welding
We weld on site, in your driveway. That means broken hinge brackets, sheared gate frames, and bent slide rails get repaired where they sit, not carted away. Hal keeps a full truck of common gate hardware and fabricates what a mass-produced parts catalog doesn’t carry. If it’s metal and it broke, we can usually fix it the same visit.
Neighborhoods We Serve in Sherman Oaks
We work all over Sherman Oaks, and we schedule jobs so we’re not crossing the Sepulveda Pass twice in one afternoon. Typical response time for a repair call in Sherman Oaks is same-day or next-morning, depending on when you call and what’s failed.
- South of Ventura Boulevard - the hillside streets rising toward Mulholland Drive
- Sherman Oaks Estates - the neighborhood north of the 101 between Kester and Van Nuys Boulevard
- Chandler Estates - the pocket near the 101 and Hazeltine Avenue
- Longridge Estates - the hillside community off Longridge Avenue
- Valley Vista - the streets near Sherman Oaks Galleria and Ventura Boulevard
Why Sherman Oaks’s Climate & Housing Affect Gate Repair
Sherman Oaks sits where the flat San Fernando Valley floor meets the Santa Monica Mountains foothills. That’s not a scenic detail; it’s a mechanical one. The neighborhood south of Ventura Boulevard has steep hillside driveways where automatic gate operators must work against significant grades. A swing gate on a 15-20% incline puts constant gravitational load on the operator’s gears, and a unit sized for flat ground burns out prematurely. On those hillside jobs, the swing arm geometry has to be configured for uphill and downhill torque. Skip that calibration, and the gate creeps open under its own weight or trips its own safety stops. We see that exact failure on hillside gates all over Sherman Oaks.
Then there’s the heat. Valley summer temperatures past 100°F are the norm here, and metal gate frames expand enough to bind slide gate rollers and throw limit switches out of whack. We set clearances for the hottest month, not for the installer’s convenience. Between the heat and the grade, a Sherman Oaks gate gets punished harder in a year than a Santa Monica gate gets in a decade.
Pricing for Gate Repair in Sherman Oaks
Gate repair pricing in Sherman Oaks runs from about $150 for a basic service call and minor adjustment to $600-$900 for a full motor replacement or major weld repair. The honest range is wide because gates fail in different ways. A misaligned photo-eye costs little. A burned-out hillside opener is a bigger job.
- Service call / minor adjustment: $150-$250
- Limit switch or photo-eye repair: $180-$320
- Broken hinge or bracket weld (on site): $200-$400
- Gate opener replacement (motor only, labor included): $450-$900
- Full slide or swing gate repair with hardware replacement: $500-$1,200
Every quote is written and agreed before we touch the gate. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. You will not get a different number at the door than the one you heard on the phone.
Service Area - Cities Near Sherman Oaks
We also serve the surrounding area, including gate repair in Van Nuys, gate repair in Encino, gate repair in Studio City, and gate repair in Tarzana.
Serving Sherman Oaks, CA - Our Local Coverage Area
We’re based in the Sherman Oaks area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sherman Oaks
In most cases, yes. We schedule repair work across Sherman Oaks every weekday, and because we answer the phone live, you’ll know your window before you hang up. Call (818) 873-5061 and describe what the gate is doing. If it’s a safety issue, like a gate that won’t stop or a garage-side entry hanging off its hinges, we’ll make room in the schedule that day.
Most repairs in Sherman Oaks fall between $150 and $900, depending on whether it’s a simple adjustment, an on-site weld, or a full opener replacement. The price is quoted and agreed before any work starts, so there are no surprises at the end. Call (818) 873-5061 and Hal or one of his crew can usually give you a tight range just by hearing the symptom.
South of Ventura Boulevard, it’s hillside gate operators that have burned out or lost their travel calibration because the installer treated the sloped driveway like a flat one. North of the 101, it’s older concrete posts that cracked or settled after the 1994 Northridge earthquake, throwing the gate out of square so it won’t latch or close cleanly. We see both problems every week, and both are fixable on site in most cases.
We weld on site, in your driveway. Hal has been doing mobile gate welding since 2001, and the truck carries the welder, the steel, and the hardware to get most broken gates moving again the same visit. The gate never leaves your property unless you are replacing it entirely.
Yes. We service nine major gate brands, including LiftMaster, FAAC, BFT, and Linear, and we stock common parts for them on the truck. If the operator is worth saving, we’ll say so. If it’s undersized, outdated, or unsafe, we’ll show you why and quote a replacement without any sales pressure. Estimates are free, and the 90-Day Done Right Promise covers every repair we make.
Contact Gatewood Fence & Gate in Sherman Oaks
If your gate is misbehaving, call (818) 873-5061. Tell us what street you’re on, what the gate is doing, and when you need it fixed. We’ll give you a straight answer about cost and timing, and the person who shows up will be someone who is accountable for the work. Hal’s name is on the shop and on every invoice, and the 90-Day Done Right Promise is in writing on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sherman Oaks and the San Fernando Valley since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sherman Oaks Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks