Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Santa Monica, CA
If your gate is groaning, sagging, or refusing to close all the way, you’re probably not in the mood for a long story. Here’s what you need to know: Gatewood Fence & Gate repairs gates in Santa Monica same-day in most cases, and Hal Gatewood works on the gate himself rather than handing you off to a rotating crew. The phone rings to a live person, not a menu, and you’ll get a straight answer about whether the hinge needs welding or the whole post needs resetting in the sand.
We’ve seen every failure mode this stretch of coast can throw at a gate: salt-caked rollers in Ocean Park, gravity drift on Riviera hillsides, and automation that gave up after one too many foggy nights. Call (818) 873-5061, and we’ll tell you honestly what you’re looking at and whether it’s a same-day fix.
Most gate repairs in Santa Monica fall between $180 and $500 depending on the part and the metal condition. The price gets quoted and agreed before anything gets unbolted.
Key takeaways:
- Same-day gate repair is available for most non-automation failures.
- We weld on-site in your driveway; we don’t haul the gate away.
- Every job carries the 90-Day Done Right Promise in writing.
- A live person answers the phone 24/7, not a voice tree.
- Upfront pricing, free estimates, and a published address you can verify.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Santa Monica Homeowners Choose Gatewood Fence & Gate
People call us after they’ve already been burned. The national company quoted one number on the phone, sent a truck from somewhere in the Valley, and then presented an invoice that made the quote look like a typo. That doesn’t happen here because Gatewood Fence & Gate is owner-operated since 2001, with Hal Gatewood’s name on the shop and on every invoice. You can drive to the shop, or you can call and ask for Hal, and it’s the same person who will show up.
In Ocean Park and Sunset Park, we repair a lot of 1920s and 1930s wrought-iron gates on bungalows where the original hardware predates the Eisenhower administration. Those hinges were forged when salt air was the only oxidizer. Up in the Riviera, it’s a different problem: heavy automated driveway gates on slopes where a two-degree grade will make a slide gate creep for the street if the limit switches aren’t dialed in. We handle both in the same week, often with the same truck.
The 90-Day Done Right Promise isn’t a slogan. It’s stamped on the paperwork. If the gate isn’t right, you call, and Hal comes back. No dispatch queue, no service-ticket runaround.
Gate Repair Services We Offer in Santa Monica
Gate Repair
A sagging gate is almost always a post problem or a hinge problem, not a mystery. We fix the post, weld the hinge, straighten the frame, and try to keep the original gate when it still has life in it. A fix that lasts beats a replacement that’s sold to you as the only option.
Learn more about our Gate Repair in Santa Monica.
Gate Installation
Some gates are too far gone, or the property has changed and the old swing doesn’t work for the driveway anymore. We install new gates that fit the house, the grade, and the coastal weather, with hardware that won’t rust through in two seasons.
Learn more about our Gate Installation in Santa Monica.
Gate Motor & Opener
Operators near the ocean eat circuit boards faster than inland units. We service and replace openers from LiftMaster, FAAC, BFT, and Linear, and we weatherproof the housing so the next board survives more than a couple of marine-layer seasons.
Learn more about our Gate Motor & Opener in Santa Monica.
Gate Access Control
From keypads to intercoms to loop detectors, high-value properties in the Riviera and Brentwood require access systems that actually pair with the gate and don’t fail silently. We wire, program, and test them on-site.
Gate Parts & Welding
We carry heavy hinge sets, roller bearings, and track hardware, and we weld on-site when a bracket snaps or a weld fails. We’re the opposite of a replace-everything shop; we fix metal and send the gate back to work.
Neighborhoods We Serve in Santa Monica
We’re in Santa Monica every week, so our response time is usually measured in hours, not days. Here are a few of the areas we serve regularly:
- Ocean Park
- Sunset Park
- North of Montana
- Riviera
- Sawtelle
We also serve homes near the Venice border in 90404 and across the 90025 and 90024 ZIP codes.
Why Santa Monica’s Climate & Housing Affect Gate Repair
Santa Monica sits directly in the path of the Pacific marine layer, and that salt-laden humidity is the single biggest factor in gate failure here. It’s not the dramatic storms people imagine; it’s the slow, relentless accumulation of sea salt in hinge pins, roller bearings, and track channels. Even powder-coated wrought iron gates close to the beach in Ocean Park regularly show rust bleeding through the coating within a few years unless the metal was properly sealed and the hardware was chosen for coastal exposure.
The housing stock compounds it. We repair 1920s and 1940s bungalow gates with original hardware that’s been quietly corroding for decades. A mile away in the Riviera, automated driveway gates on hillside lots have their own failure pattern: gravity works against the gate, and limit switches and counterweights that were set without accounting for grade cause drift and creep. The Venice Canal Historic District adds another wrinkle entirely, with canal-facing gates enduring both ocean air and waterway moisture at once, plus historic preservation requirements that narrow the hardware choices.
Pricing for Gate Repair in Santa Monica
Gate repair pricing in Santa Monica typically lands here:
- Hinge replacement or welding: $180-$350 depending on the metal and access
- Gate frame straightening: $250-$500
- Track or roller replacement for slide gates: $200-$450
- Opener control board or motor service: $300-$800
- Full operator replacement: $900-$2,500
The price is agreed before the work starts, in writing. There’s no trip charge inside the county, and $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Call (818) 873-5061 for an exact quote.
Service Area - Cities Near Santa Monica
We serve Santa Monica and the surrounding Westside. If you’re in Beverly Hills, West Hollywood, Sherman Oaks, or Encino, we can usually reach you the same day or next morning.
Serving Santa Monica, CA - Our Local Coverage Area
We’re based in the Santa Monica area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Santa Monica
Most gate repairs in Santa Monica run $180 to $500, with opener repairs and full automation replacements going higher. The price is quoted and agreed before any work starts. Call (818) 873-5061 for a free estimate.
In most cases, yes. Gatewood Fence & Gate has repair crews in Santa Monica weekly, so same-day service is available for most mechanical gate failures. Automated operator issues may need a diagnosis first, but the phone is answered around the clock and we’ll tell you if today is realistic.
The marine layer delivers salt-laden humidity without the heavy rain to wash it away. Sea salt accumulates in hinge pins, rollers, and track channels, and oxidation starts within a few years even on coated steel. We recommend coastal-rated hardware and sealed welds for any gate within a mile of the ocean.
Yes. We service and install LiftMaster, FAAC, BFT, and Linear gate operators, and we see all four regularly in Santa Monica. We also handle the weatherproofing that coastal conditions require.
On hillside properties in the Riviera and elsewhere, gates often drift because limit switches and counterweights weren’t set for the grade. We adjust them in place so the gate stays where it’s supposed to. Call (818) 873-5061 and we’ll walk you through it.
If your gate isn’t closing right, sticking, or groaning every time it moves, call (818) 873-5061. A live person answers, the estimate is free, and the price doesn’t change at the door.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Santa Monica since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Santa Monica Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo