Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Tarzana, CA
If your gate groans on its hinges every morning, drifts shut on its own, or stopped responding to the opener, you’re not the only one in Tarzana dealing with it this week. We answer the phone at (818) 873-5061 with a live person, every time. Most Tarzana gate repairs we handle get a same-day or next-day visit, because a gate stuck open stops being a gate. A gate stuck closed stops being a driveway.
The flat streets south of Ventura Boulevard and the hillside estates up near Braemar Country Club have different gate problems, different hardware, and different failure patterns. We know both zones because we work them constantly. The person who shows up has been fixing gates since 2001, and his name is on the shop.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Tarzana Homeowners Choose Gatewood Fence & Gate
Hal Gatewood built this company around a simple habit: show up when you say you will, fix the actual problem, and stand behind the work in writing. Every job carries a 90-Day Done Right Promise. If it isn’t done right, one call brings Hal back. No runaround, no phone tree, no third-party dispatcher telling you someone might arrive between 8 and 6.
We work constantly in the Melvin Avenue corridor and up through the hillside streets surrounding the Braemar Country Club. Homeowners there have seen us weld a cracked hinge plate in the driveway rather than haul the gate to a shop. They’ve watched us replace a LiftMaster control board and recalibrate the travel limits the same visit. And they know that when they call at 2 a.m. because a gate won’t close, a live person answers, not a voicemail.
We’re locally owned, owner-operated, licensed and insured, and our address is published. You can drive to the shop and look the person who gave you the quote in the eye. That matters after you’ve been burned by a national outfit quoting one number on the phone and a different one at the door.
Gate Repair Services We Offer in Tarzana
Gate Repair
A gate that sags drags against the ground because the hinge post or the hinges themselves have failed, not because the panel “went bad.” In Tarzana, we replace broken hinge plates, re-weld cracked frames, straighten bent posts, and re-hang heavy ornamental gates so they swing true again. If we can repair it, we repair it. We don’t sell you a new gate when the old one has ten more years in it. Learn more about Gate Repair in Tarzana.
Gate Installation
When a gate truly is beyond saving, or when a driveway never had a gate at all, we build and install the right one for the slope, soil, and daily use it’ll face. On Tarzana hillside lots, that means heavier posts, deeper footings, and counterbalancing that flat-land installers often skip. Every installation gets a measured quote in writing before any work starts. Learn more about Gate Installation in Tarzana.
Gate Motor & Opener
A Tarzana summer will cook a circuit board that would last a decade in Santa Monica. We service and replace gate motors and openers from LiftMaster, FAAC, BFT, and Linear, and we stock common Tarzana failure parts so we’re not ordering and waiting while your gate sits dead. When an opener dies, we figure out why it died before we bolt in the next one. Learn more about Gate Motor & Opener in Tarzana.
Gate Access Control
Keypads, intercoms, remote controls, vehicle sensors, phone-entry systems. We install Gate Access Control in Tarzana that reads reliably in 105-degree heat and doesn’t confuse the UPS truck for a car. For hillside properties with long driveways, we recommend systems that let you see and speak to whoever is at the gate before it opens.
Gate Parts & Welding
We weld on site, in your driveway, which means the gate stays put and you’re not paying for Tarzana Gate Parts & Welding to uninstall, transport, and reinstall it. We fabricate replacement hinge plates, repair cracked wrought iron frames, and rebuild gate sections that a national would tell you to replace whole. Welding is a real craft, and we bring the welder to your gate, not the other way around.
Neighborhoods We Serve in Tarzana
We work all over Tarzana, from the gated estates north of Ventura Boulevard to the ranch homes south of it. You’ll see our truck around Braemar Country Club, Melvin Avenue, our Reseda service area on Reseda Boulevard, Oxnard Street, and in the 91356 ZIP. For most repair calls anywhere in Tarzana, we can be there same day or next day. For weld work and motor replacements, we’ll give you an honest arrival window when you call.
- Hillside estates north of Ventura Boulevard
- Braemar Country Club area
- Melvin Avenue corridor
- Flat Valley floor south of Ventura Boulevard (91356)
- Reseda Boulevard and Oxnard Street area
Why Tarzana’s Climate & Housing Affect Gate Repair
Tarzana splits into two very different gate zones. South of Ventura Boulevard, you find 1950s to 1970s ranch homes with older, simpler wood or tubular-steel fence gates. The repairs there are usually hinge failures, rotted gate posts, or an ornamental section that finally rusted through.
North of Ventura, the hillside estates surrounding the Braemar Country Club are a different animal entirely. These are long, sloped driveways holding heavy ornamental wrought-iron and custom automated entry gates, many built from the 1970s through the 1990s. The grade causes swing gates to drift, bind, or fail to latch without proper counterbalancing and heavy-duty hinge hardware. A gate that would work fine on the flat floor in Encino, CA or Reseda will slowly pull itself apart on a Braemar slope. That’s not a design flaw, it’s physics, and the fix is in the hardware and the balance, not in patching the panel.
Then there’s the heat. Tarzana regularly hits 100°F plus in summer, and that cooks automated gate operator circuit boards far faster than coastal LA. UV cracking of wiring insulation and rubber seals is a constant. And every fall, the Santa Ana winds funnel through the Valley corridor and wreak havoc on hillside gates. Bent frames, snapped welds, hinges thrown out of plumb. The first two days after a strong Santa Ana event generate a predictable surge of emergency calls from the hillside estates north of Ventura. So predictable, in fact, that we stock extra heavy-duty hinge weld kits before wind season starts. When you call us after a windstorm, we know exactly what broke before we even see it, because we’ve fixed the same gate five houses down the hill.
Pricing for Gate Repair in Tarzana
Gate repair in Tarzana typically runs between $180 and $450 for common fixes, with more involved weld repairs or opener replacements at the higher end and sometimes beyond. On-site hinge plate welding usually falls in the $250 to $600 range depending on access and the weight of the gate. A new opener unit, installed, commonly runs $550 to $1,200 including programming and safety setup.
You get a firm, written price before any work starts. No trip charge inside the county. We take $40 off any repair over $200, offer a free second opinion on any written estimate, and give a permanent 10% discount to seniors and veterans. If you’ve got a written quote from another company, bring it and we’ll tell you honestly whether it’s fair or whether you’re being taken for a ride.
Service Area - Cities Near Tarzana
While this page is focused on Tarzana, our crews also work regularly in Encino, Reseda, Sherman Oaks, and Northridge. If you’re in a neighboring Valley community, call us at (818) 873-5061 and we’ll let you know when we can get there.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tarzana
Most Tarzana gate repairs fall between $180 and $600, depending on whether it’s a simple hinge adjustment or a full weld repair on a heavy hillside gate. We quote a firm price in writing before any work starts, and we take $40 off any repair over $200. Call (818) 873-5061 and describe what your gate is doing. We’ll give you a straight answer about the likely range before we schedule anything.
In most cases, yes. For a gate stuck open or closed in Tarzana, we prioritize that call and can usually get there the same day, often within a few hours. If you’re north of Ventura on a hillside lot, tell us that when you call, because the truck we send needs the heavier welding gear. Call (818) 873-5061 and a live person will give you a real arrival window, not a four-hour maybe.
Santa Ana winds slam heavy swing gates hard against their stops, and the force cracks welds at the hinge plate or bends the frame. It’s the single most common wind-related failure we see in Tarzana’s hillside neighborhoods north of Ventura Boulevard. The fix is on-site re-welding and straightening, which we do in your driveway. After a strong wind event, call early, because these calls stack up fast. Reach us at (818) 873-5061.
We repair them when repair makes sense and replace them when it doesn’t. A LiftMaster, FAAC, BFT, or Linear opener that died from a heat-fried board can often be brought back with a new board the same visit. A unit with a failing gearbox or a 15-year-old motor is usually better replaced. We’ll show you the failed part and explain the decision in plain English before we do anything. Estimates are free, so call (818) 873-5061 and get a straight answer.
All the time. The hillside estates north of Ventura, including the Braemar Country Club area, are some of the most demanding gate sites in the Valley. A swing gate on a grade needs proper counterbalancing, heavy-duty hinge hardware, and operators rated for the load. If a gate drifts or binds on a slope, the cause is almost always a hinge or balance problem, not the panel itself. We’ll fix it at the source. Call (818) 873-5061 for an assessment.
Contact Gatewood Fence & Gate in Tarzana
You don’t need to keep wrestling with a gate that’s decided to quit. Call us at (818) 873-5061 and describe what’s happening. We’ll give you an honest take over the phone, a firm price before we touch anything, and a 90-Day Done Right Promise on every job. If you’d rather meet the person who’ll be doing the work, come to the shop. The name is on the door, and the door is open.
Written by Hal Gatewood, owner at Gatewood Fence & Gate, serving Tarzana, CA and the surrounding San Fernando Valley since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tarzana Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks