Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Northridge, CA
If your gate groans when it opens, sags toward the latch post, or the motor runs but the gate doesn’t move, you’re dealing with a repair that will not fix itself. Most Northridge gate failures come down to two things: post-quake footings that have shifted over 30 years, and operators that have cooked through too many San Fernando Valley summers. We’ll have someone at your property fast, and Hal answers his phone around the clock. Call (818) 873-5061 and tell us what the gate is doing.
We’re Gatewood Fence & Gate, owner-operated out of Los Angeles with crews working throughout Northridge daily. We weld on site, we repair before we replace, and every job carries a written 90-Day Done Right Promise. No voicemail maze. No call center three states away. Just a live person who knows gates.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Northridge Homeowners Choose Gatewood Fence & Gate
Northridge is different from Encino or Tarzana. The gates here sit on ground that moved in 1994, and a lot of them were installed in the rebuild years right after. That means we see hinge wear and operator strain that has a specific cause, not just “old gate.” Hal started this company in 2001, and his name is on the shop and every invoice. You can look up his address. You can look up his license number. That’s the point.
We work throughout Northridge, including the neighborhoods around Cal State Northridge, the Devonshire Street residential corridors, the pockets off Reseda Boulevard, and the post-war tracts south of Nordhoff Street. When we say we know Northridge, we mean we’ve been under those gates, in those driveways, with a wrench in hand, more times than we can count.
Our standing offer for Northridge homeowners: $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. That’s the deal, plain as it gets.
Gate Repair Services We Offer in Northridge
We handle the whole gate, from the post in the ground to the motor on the arm to the keypad by the driveway. Here’s what you can expect from each service. Learn more about our Gate Repair in Northridge, Gate Installation in Northridge, and Gate Motor & Opener in Northridge on their detailed pages.
Gate Repair
Sagging panels, binding hinges, broken welds, sprung latch pins. We fix them in your driveway, not in our shop. Hal’s crew welds on site so your gate never leaves your property, and if the post is out of plumb, that’s where the repair starts, not where it ends. Learn more about gate repair in Northridge.
Gate Installation
New swing or slide gate, measured to fit the opening and to account for Northridge’s slope and soil. We quote a written price before any work starts, and no number changes at the door. We also set posts in fresh concrete, not the patched footings leftover from the ’94 quake. Learn more about gate installation in Northridge.
Gate Motor & Opener
If your gate opens fine by hand but stalls under motor power, the problem is usually the operator, the capacitor, or the circuit board. We service LiftMaster, FAAC, BFT, and Linear units regularly, and we stock the common parts so we can fix most openers in one visit. Learn more about gate motor and opener service in Northridge.
Gate Access Control
Keypads, intercoms, loop detectors, remote receivers, and phone-based systems. We wire, program, and diagnose the whole setup so the gate opens when it should and stays shut when it shouldn’t.
Gate Parts & Welding
Sometimes the gate doesn’t need replacing. It needs a hinge, a wheel, a section of rail, or a solid weld where the old one cracked. We keep a truck stocked with the parts these gates actually use, and we weld on site. Fix what’s broken, leave what isn’t.
Neighborhoods We Serve in Northridge
We run daily routes through Northridge and the surrounding area, and typical response time for emergency gate repairs is same-day inside Northridge. Crews work from the brand’s Los Angeles office and dispatch to Northridge every morning.
- Northridge West, around Tampa Avenue and Lassen Street
- Sherwood Forest, east of Yolanda Avenue
- The Devonshire Corridor, near Devonshire Street and Reseda Boulevard
- Northridge East, south of Nordhoff Street and west of Balboa Boulevard
- Porter Ranch-adjacent pockets along the 118 corridor
Why Northridge’s Climate & Housing Affect Gate Repair
Northridge was the epicenter of the 1994 Northridge Earthquake, and the mid-1990s rebuilding boom means a large cohort of residential gates, along with their concrete pilasters and footings, are now 25 to 30 years old and failing simultaneously. We see the pattern weekly: a gate post looks plumb on the outside, but the footing underneath was cracked and patched, not replaced, after the quake. The post sits canted just enough off-axis that the gate binds on the operator arm under load. The homeowner hears the motor struggle, gets an intermittent error code, and assumes the operator is dead. Half the time, the operator is fine. The post is the problem.
Then there’s the heat. Northridge sits deep in the inland San Fernando Valley and regularly records summer highs of 105 to 112 degrees. That kind of heat doesn’t just make your gate warm. It embrittles vinyl and wood components, warps aluminum frames, and kills operator circuit boards and capacitors years before their rated lifespan. Rubber wheel seals harden and crack. Plastic gear housings soften and deform. And when Santa Ana winds hit in the fall, gates get slammed against their mechanical stops, which spikes hinge stress and motor strain in a compressed seasonal window. A gate that survived the summer heat will often fail in October, right when the wind picks up.
Pricing for Gate Repair in Northridge
Here’s the honest breakdown. Basic hinge replacement or latch adjustment: $120 to $240. Welding a cracked frame or re-hanging a sagged gate: $250 to $450. Operator capacitor or circuit board replacement: $180 to $350. Full operator replacement with a new LiftMaster or Linear unit: $700 to $1,400 installed. Post resetting with new footing: $400 to $900, depending on access and post size. Every price is quoted and agreed before work starts. No surprises at the door. Call (818) 873-5061 and Hal will give you a straight number.
Key Takeaways
- Same-day gate repair available in Northridge for most hinge, latch, and operator failures
- On-site welding means your gate never leaves your driveway
- Every job carries a written 90-Day Done Right Promise
- Standing offers: $40 off repairs over $200, free second opinion, no trip charge in-county
- Senior and veteran discount of 10%, permanent, no haggling
Service Area - Cities Near Northridge
We also handle gate repairs in the surrounding Valley communities, so if you’re just over the line, give us a call. Learn about home services across the region, or check our service details for nearby Reseda, Granada Hills, Tarzana, and Encino.
Serving Northridge, CA - Our Local Coverage Area
We’re based in the Northridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Northridge
Most Northridge gate repairs run between $120 and $450 for hinge, latch, weld, and capacitor work; a full operator replacement generally runs $700 to $1,400. The price is quoted and agreed before we start, and our $40-off-repairs-over-$200 offer applies. Call (818) 873-5061 for an exact quote, and remember estimates are free.
Yes, for most hinge, latch, and electrical repairs, we can have someone at your Northridge property the same day you call. We keep common LiftMaster, FAAC, and Linear parts on the truck, so we rarely need a second visit. Call (818) 873-5061 in the morning and we’ll tell you the window.
In Northridge specifically, it’s often a post that shifted after the 1994 earthquake, visually plumb but canted enough to bind the gate on the operator arm. The fix is resetting the post, not replacing the motor, so before you buy a new operator, let us look. Call (818) 873-5061 and we’ll diagnose it properly.
We weld on site. Hal’s crew brings the welder to your Northridge driveway, because taking a gate off its hinges and hauling it away creates more problems than it solves. The gate stays where it belongs, and the repair is done in your driveway.
New gate panels or tubing, hinges, latch, posts or post reinforcement, and operator mounting if needed. In Northridge, we also pay attention to the footing, because a new gate on a patched post-quake footing will fail the same way the old one did. Price is written and agreed before we order materials. Call (818) 873-5061 for a free measure and quote.
Yes. If the gate needs a new circuit, conduit, or photo-eye sensors to meet current code, we handle it during the installation or repair. Safety edges are not optional, and we won’t leave a gate running without them. Call (818) 873-5061 and we’ll tell you what the existing setup needs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Northridge Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks