Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Granada Hills
Gate repair in Granada Hills usually means one of three things: a swing gate that’s sagging and dragging, an opener that quit answering the remote, or a slide gate that binds when the afternoon heat hits. Most calls we take here involve a gate installed between 1994 and 1997, right after the Northridge earthquake, and those units are now giving up all at once. We’re Gatewood Fence & Gate, and we’ve been fixing gates since 2001. Hal Gatewood owns the shop, his name is on every invoice, and a live person answers the phone at (818) 873-5061 any hour you call.
Key Takeaways:
- Most Granada Hills gate failures trace back to post-quake era installations from 1994-1997, now 27-30 years old and hitting end-of-life together.
- We repair first and replace only what’s actually broken. On-site welding keeps your gate in your driveway, not hauled to a shop.
- Every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back.
- Free estimates, no trip charge inside Los Angeles County, and a permanent 10% discount for seniors and veterans.
Why Gatewood Fence & Gate Is Granada Hills’s Preferred Gate Repair Company
We’re not a nationwide outfit with a call center three states away. We’re locally owned and owner-operated, and Hal Gatewood has been at this since 2001. His address is published, his license number is public record, and he means it when he says you can drive to the shop and look him in the eye.
Granada Hills homeowners keep calling us because we show up when we say we will, we quote a price before any work starts, and we don’t pad the invoice at the door. The person who answers your call is a real human being, 24/7. Not a voicemail, not a chatbot, not a dispatch queue. When a gate won’t close and your property sits open to Balboa Boulevard traffic, that matters.
Our Gate Repair team has worked on ranches and wide-lot homes from Rinaldi Street north to the foothills, from Woodley Avenue over to Zelzah. We know the block-wall perimeter fencing, the long driveway approaches, and the older operators that run them. Show us a gate closing on its own and we’ll show you where it’s failing. That’s the accountability that comes from a name on the shop and a shop down the road.
Our Gate Repair Services in Granada Hills
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That’s where we start. In Granada Hills, we routinely find posts that are plumb but set in cracked or heaved footings, especially on foothill streets north of Rinaldi where the 1994 earthquake shifted grade. We dig out the old footing, re-set the post in new concrete, and weld the hinges square. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
When a swing gate drags or a slide gate binds, the fix often comes down to realignment, not replacement. We adjust hinge geometry, reset rollers, and shim posts so the gate travels true. The inland Valley heat, which regularly hits 105-110°F in summer, makes metal expand and bind. A gate that ran fine in March might rack and stick by July. We account for that when we set your gate.
Electric Gate Repair
Electric gate repair in Granada Hills usually means troubleshooting the operator, the loop detector, or the wiring run from the house. Many of these systems were installed in the mid-1990s, and their motor housings are corroded and their control boards are failing. We carry parts for LiftMaster, FAAC, BFT, and Linear, and we stock enough to keep most Granada Hills repairs to a single visit. A live person answers the phone around the clock, and we quote the price before we touch the gate.
Automatic Gate Repair
Automatic gate repair here often comes down to this: the gate is fine, the opener is done. If the unit was installed during the post-quake construction boom, it’s now 27 to 30 years old. We don’t swap parts that don’t need swapping. We test the motor, board, and sensors, replace only what’s dead, and give you a written price before any work begins. When solar power is the only practical option for a gate set far from the house, we handle that too.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Granada Hills
We’re certified to service nine gate brands, and in Granada Hills we see a lot of LiftMaster, Viking, and Linear units, many dating to the mid-1990s. We also work on FAAC and BFT openers for heavier commercial and large residential gates. Because we stock parts locally and weld on site, most repairs don’t require waiting on a shipped part. If your opener is from the post-quake era, we can often rebuild it for less than a full replacement costs, and we’ll tell you straight when replacement is the smarter call.
Common Gate Repair Problems We See in Granada Hills Homes
- Post-quake era operators failing all at once. The 1994-1997 reconstruction boom put thousands of Viking and Linear swing gate operators into Granada Hills driveways. Those units are now 27-30 years old, and their motor housings and control boards are reaching end-of-life together. We see this wave across the neighborhood every week.
- Sagging gates on plumb posts. A gate post can look perfectly straight while its footing underneath is cracked and heaved from years of earthquake grade shifts. This is common on foothill streets north of Rinaldi. The gate sags, the opener strains, and eventually the hinge welds crack.
- Heat binding on slide gates. Summer temperatures in the San Fernando Valley regularly exceed 105°F, far hotter than coastal Los Angeles. Metal rails expand, lubrication dries out, and slide gates bind in their tracks. We set roller clearances with the heat in mind, not just for a cool March afternoon.
- Santa Ana wind racking. Wind events funnel through the Valley with real force near the foothills at the northern edge of Granada Hills. Unsecured swing gates get racked, and slide gates get pushed off their rollers. We add wind bracing and check stops where the exposure calls for it.
Pricing for Gate Repair in Granada Hills, CA
A typical hinge and post repair in Granada Hills runs $250 to $600, depending on whether the footing needs re-pouring and how much welding the panel requires. Gate realignment usually lands between $180 and $350. Electric gate repairs start around $150 for a sensor or loop detector replacement and run $300 to $700 when the motor or control board is involved. A full operator replacement for a post-quake era Viking or Linear unit, including the new LiftMaster opener and loop detector, typically falls between $1,200 and $2,600.
The price you hear on the phone is the price on the invoice. We quote every job before work starts, and we don’t change it at the door. You get $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you’ve received from another company. Seniors and veterans always get 10% off. Call (818) 873-5061 for a free estimate and a straight answer.
We Also Serve Cities Near Granada Hills
Our crews serve all of Granada Hills and the surrounding Valley communities. That includes Granada Hills proper, plus San Fernando, Northridge, Sylmar, and Panorama City. If your gate sits anywhere in the north Valley, we’ll be there with the same upfront pricing and the same 90-Day Done Right Promise.
Serving Granada Hills, CA - Our Local Coverage Area
We’re based in the Granada Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Granada Hills
Because the neighborhood was in the hardest-hit zone of the 1994 Northridge earthquake, and most residential automatic gates here were installed during the 1994-1997 post-quake reconstruction boom. Those operators are now 27 to 30 years old, and they’re wearing out all at once. You won’t see this same concentration of simultaneous failures a few miles south in Sherman Oaks, where gates are newer on average. Call (818) 873-5061 and we’ll tell you whether your unit is worth rebuilding or time to retire.
Your post footing is likely cracked or heaved. In Granada Hills, especially on foothill streets north of Rinaldi, the 1994 quake shifted grades in ways that took years to show up. The post sits plumb, but the concrete around it is broken underneath, so the whole assembly leans under load. We dig out the old footing, re-set the post, and weld the hinges back square. Fix the panel without the post and you’ll fix it twice. Call us for a free look before the hinge welds crack.
Yes, and it’s a common request on the wide-lot ranch-style properties that define much of Granada Hills. When a driveway runs a long way from the main electrical panel, trenching a power line can cost more than the opener. A solar-powered operator with battery backup is often the cleanest answer. We handle the panel, the battery, the operator, and the wiring, and we quote the full job before any work begins. Call (818) 873-5061 and we’ll come measure your gate and give you a written number.
It’s common in Granada Hills, but it’s not something you should live with. The inland Valley hits 105-110°F in summer, and metal rails expand enough to bind against the rollers. Lubrication also dries out faster in that heat. We set roller clearances and choose greases meant for Valley temperatures, so your gate runs through August without seizing. If it’s binding now, call us before the motor burns out trying to force it.
We repair them when repair makes sense. If your mid-1990s Viking or Linear unit has a dead capacitor, a worn limit switch, or a bad loop detector, we can often fix it for a few hundred dollars and keep it running. If the motor housing is corroded through and the board is burned, we’ll tell you straight and quote a replacement. Either way, the price is agreed before we start. Call (818) 873-5061 for an honest read on your opener.
Call Gatewood Fence & Gate for Gate Repair in Granada Hills
When your gate won’t open or won’t close, you want a name you can verify and a face you’ll see again. Hal Gatewood has been fixing gates since 2001, his shop is local, and he stands behind every job with a 90-Day Done Right Promise in writing. The person who answers your call is a live human being, 24/7. Call (818) 873-5061 for a free estimate, and we’ll be out to Granada Hills to look at your gate and give you a straight answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Granada Hills since 2001.