Gate Access Control in Beverly Hills - Written Price, Install Date Set

Fast, Reliable Gate Access Control in Beverly Hills, CA

Gate access control in Beverly Hills typically runs $450-$1,800 for keypad or card reader installation and $1,200-$4,500 for a full video intercom and smart access retrofit, depending on the gate’s weight, the operator type, and whether the existing masonry pillars can be worked around. We’re Gatewood Fence & Gate, and we’ve been fixing and automating estate gates since 2001. Hal Gatewood owns the shop, his name is on every invoice, and the person who answers your call at (818) 873-5061 is the person who will show up at your driveway. Not a call center, not a chatbot.

Call (818) 873-5061

Why Beverly Hills Homeowners Call Gatewood Fence & Gate for Gate Access Control

Most of the access control work we do across Beverly Hills involves gates that were never off-the-shelf. In the Beverly Hills Flats, south of Santa Monica Blvd, we’re working on original 1920s and 1930s Spanish Colonial and Tudor estates whose gate pillars are load-bearing cast stone or hand-laid brick. Drill into the wrong spot and you’ve just compromised a 90-year-old masonry feature the city’s building staff will flag immediately. Our crew has been running low-voltage wiring along those pillars cleanly for years, surface-mounting conduit where coring isn’t safe, and passing Beverly Hills inspections the first time.

We also get called to the hills above Sunset, where driveways pitch at 15 to 20 degrees and heavy custom wrought-iron gates fight gravity every time they cycle. Those properties need cantilever slide or high-torque swing operators with access control components matched to the load. A keypad that works fine on a flat 200-pound gate will fail prematurely paired with a 900-pound custom steel panel on a grade. We size everything to the actual gate, not to a catalog.

Every job we do carries the 90-Day Done Right Promise in writing. If something isn’t right, Hal comes back. One call. No dispatcher, no ticket queue. The pricing is agreed before any work starts, and we don’t change it at the door. That’s a promise, not a footnote.

Our Gate Access Control Services in Beverly Hills

Keypad Entry

Keypad entry for a Beverly Hills estate gate runs $450-$900 installed when paired with an existing operator. We stock commercial-grade weatherproof keypads that handle the UV exposure on sun-facing gate positions, which degrades cheap residential units fast. The Flats properties often need a keypad mounted on a pedestal or a stone pillar face, and we know how to do that without drilling through original masonry.

Remote Control

Remote control replacement, programming, and range extension runs $150-$400 on most Beverly Hills gates. If your remote works from 10 feet but not from the top of the driveway on a hillside home, it’s usually an antenna or receiver issue, not the remote itself. We fix the actual problem rather than handing you a second remote that won’t solve it.

Phone Entry

Phone entry systems, where a visitor calls from the gate and you open it from your cell, typically run $600-$1,600 installed. We’ve put these on estate gates north of Sunset where driveways are long enough that nobody walks down to check who’s at the street. They integrate with existing cellular service so you don’t need a landline.

Card Reader

Card reader or fob access for staff, gardeners, and service contractors in Beverly Hills runs $500-$1,200 per gate. On properties with guest houses or pool entries, we usually set up multiple readers and unique credentials per user so you can revoke access when someone leaves. That’s common on the large Trousdale Estates lots where household staff and outside vendors both need gate access.

Trusted Brands We Service in Beverly Hills

We’re certified to service nine major gate brands, and in Beverly Hills we see a lot of FAAC and Gate Access Control equipment on the heavy custom gates, with LiftMaster on newer residential installs and Elite on estate-scale slide systems. We stock common parts and controller boards locally, so we’re not waiting four days for a part to ship. If your existing system is from a brand we service, we’ll repair it on site. If something genuinely needs replacing, we’ll tell you that straight, and we’ll weld or fabricate in your driveway when that’s the better fix.

Common Gate Access Control Problems We See in Beverly Hills Homes

• Santa Ana wind damage to hinge posts and limit switches. The fall and winter wind events push enormous lateral force against solid-panel gates, which bends hinge posts and throws off limit switch alignment. Your keypad or phone entry still works, but the gate itself won’t close fully, and then the safety edges trip.
• UV-degraded photo-eye lenses and wiring insulation. On sun-facing gate positions, the sensor lenses cloud over and the low-voltage wiring sheathing cracks after a few years. The gate reverses for no reason. We replace these far more often in Beverly Hills than at coastal properties.
• Failed conduits through legacy stone or brick pillars. We regularly find gates where a previous company cored through a Flats-area cast-stone pillar to run wiring, and the pillar is now cracked or the conduit has shifted. Repairs require surface-running the wire properly and repointing the masonry, and you’ll want it inspected.
• Operator gearboxes worn early by steep driveways. On hillside properties, gravity is always pulling on the gate. Gearboxes and internal clutches wear faster than the manufacturer’s rated cycles. Annual service before wind season is cheaper than a snapped gearbox.

Pricing for Gate Access Control in Beverly Hills, CA

Local Building Code in Beverly Hills Actually Changes How This Work Gets Done

Beverly Hills is its own municipality with its own building department and its own inspectors. It’s not Los Angeles. Any gate work involving electrical modification, conduit runs, or structural changes to an automatic gate must clear Beverly Hills code, not LA code. That matters when you’re adding a video intercom to a 90-year-old gate in the Flats, or replacing an underground operator on a hillside property where drainage and conduit both get flagged. Plenty of LA-based gate companies don’t know the difference, and their work fails inspection. We’ve been pulling permits and passing those inspections for years. When we run wiring along an original cast-stone pillar, we do it the way Beverly Hills planning staff expects to see it. That’s the difference between a job that’s done once and a job you’re still fighting about three weeks later.

One job stays with us from a hillside driveway above Sunset. A Santa Ana wind event had shoved a custom wrought-iron estate gate off its latch by three-quarters of an inch and the swing operator was fighting it every cycle. Our crew replaced the worn Viking operator with a high-torque FAAC unit, realigned the hinge post, and then integrated the new keypad entry and video intercom into the home’s existing Control4 system. The low-voltage wiring was surface-run along the original cast-stone pillar without coring through it. It passed Beverly Hills inspection the first time and the gate has run silent since.

We Also Serve Cities Near Beverly Hills

Our Gate Access Control in Beverly Hills work regularly takes us into the surrounding area. We also serve West Hollywood, Studio City, Sherman Oaks, and Santa Monica. If your property sits on the Beverly Hills border and your address says one city but your gate faces another, call us. We’ll be straight about scheduling and permit jurisdiction.

FAQs - Gate Access Control in Beverly Hills