Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Los Angeles, CA
When a driveway gate stops opening in Los Angeles, it’s rarely just an inconvenience. It’s a car stuck on one side, a delivery that can’t get through, or a security gap where there shouldn’t be one. Hal Gatewood has been fixing gates in this city long enough to know that the problem is usually not what the homeowner thinks it is: a sagging hinge post, a burned-out capacitor, a track that was never right in the first place. If your gate is acting up anywhere in Los Angeles, call Gatewood Fence & Gate at (818) 873-5061 and a live person will answer. Not a voicemail, not a queued-up call center. A person.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Los Angeles Homeowners Choose Gatewood Fence & Gate
Because when a gate fails, people in this city want someone who will show up, look at the actual gate, and fix it that day. Hal has been doing this since 2001, and his name is on the shop. That is not a slogan. It means the person who answers your call is the same person who decides whether a hinge gets welded or a whole operator gets swapped. Homeowners in Sherman Oaks and Pasadena and Brentwood have called after a big national company quoted one price on the phone and handed over a different invoice at the door. That does not happen here. The price gets quoted and agreed to before any work starts, in writing, and the job carries a 90-Day Done Right Promise. If it’s not done right, Hal comes back. No runaround.
Every call is answered live, 24 hours a day, 7 days a week. The technician who shows up is background-checked and uniformed. And if you want to see who you’re dealing with before you commit, the shop has a published address in Los Angeles. You can drive over and look Hal in the eye. That is the oldest accountability there is.
Gate repair in Los Angeles is the core of what we do, but we also install new gates, service gate motors and openers, handle access control, and weld on site. More on each of those below.
Gate Repair Services We Offer in Los Angeles
Gate Repair
Most gate problems in Los Angeles come down to a handful of things: a hinge post that has moved, a sagging panel, a track that has shifted, or an operator that is straining against all of the above. Hal’s instinct is always to repair the gate in your driveway, not haul it off to a shop. On-site welding means the gate stays put, the fix happens where the problem lives, and you are not paying for a flatbed ride across town. Learn more about our gate repair services in Los Angeles.
Gate Installation
A new gate is a measured, ordered, scheduled job, not an emergency. We quote it upfront, we build it to fit your driveway, and we install it level and plumb from the posts up. If you have an older home with original masonry pillars, we will tell you honestly whether those pillars need to be re-set before any new gate goes on. Learn more about gate installation in Los Angeles.
Gate Motor & Opener
Operators fail for specific reasons: a capacitor burns out, a limit switch drifts, a gear strips, a board fries. Hal is certified to service nine major brands, including LiftMaster, FAAC, and Elite. He carries common parts on the truck, and when the part is not on the truck, he will tell you that before he starts. Learn more about gate motors and openers in Los Angeles.
Gate Access Control
Keypads, intercoms, phone-based entry, Knox switches, fire department key boxes. Gate Access Control in Los Angeles is not just about convenience; in many hillside neighborhoods, the fire code requires it. We install and repair the full run, from the keypad at the street to the wiring at the operator.
Gate Parts & Welding
Not every repair means replacing the whole gate. We replace hinges, rollers, track brackets, gate arms, and sections of steel or aluminum frame that have failed. A good weld on a broken hinge post from our Los Angeles Gate Parts & Welding service is often a better fix than a new gate that repeats the same design flaw.
Neighborhoods We Serve in Los Angeles
We work in every corner of Los Angeles, but here are a few neighborhoods where we are out regularly:
- Sherman Oaks - post-war ranch homes with cantilever and swing gates, many of them original to the house.
- Laurel Canyon - steep driveways, hillside lots, and masonry pillars that have shifted over decades.
- Brentwood - larger estates, ornate steel gates, operators that run hard daily.
- Silver Lake - 1920s and 1930s homes with original gates that sit on old footings.
- Boyle Heights - wrought-iron driveway gates standard since the 1920s, with the hinge wear to show for it.
Typical response time inside Los Angeles is same-day for repairs, and often within a few hours if the gate is stuck and trapping a vehicle. Installations are scheduled, not rushed.
Why Los Angeles’s Climate & Housing Affect Gate Repair
Los Angeles has an unusual density of automatic driveway gates across all income levels. This is a car city, and a gate is a privacy feature as much as a security feature. But the housing stock itself makes gate repair here different from anywhere else in the country. The hills, for one. In neighborhoods like Hollywood Hills, Bel Air, and Benedict Canyon, driveways are often steep, narrow, and curved. A standard ground-track sliding gate does not work on a 15% grade. Hal has to spec cantilever sliding systems or specially counterweighted swing gates engineered to open uphill against the grade, not with it. That is a hillside-gate problem that doesn’t exist in flat cities like Long Beach or Torrance, and it’s one reason a generic gate company struggles here.
Then there are the Santa Anas. Every fall and winter, offshore gusts of 50 to 80-plus mph rip through the canyons and passes. Those winds blow sliding gates off their tracks, snap swing gate arms, and bend lightweight aluminum frames. When the winds spike, our phone rings. It’s predictable, and after 20-plus years of it, we know which neighborhoods get hit hardest and what parts to keep stocked.
Along the coast from Venice to Pacific Palisades, salt-laden marine air does its own damage. Gate operator motors, hinges, and steel frame welds corrode faster there than they do even a few miles inland in Pasadena. Homeowners near the beach will replace hardware more often; that’s not a sales pitch, it’s what the salt air does. We tell people that, and we build it into the repair: better greasing, sealed hardware, more frequent lubrication cycles.
One more thing that’s specific to Los Angeles: fire code. Properties in designated high fire hazard severity zones, which blanket most hillside neighborhoods, are required to have a functioning Knox Box or fire department key switch at the driveway gate, so fire apparatus can get in without delay. When Hal fixes a gate in the hills, he checks the Knox switch as part of the job. Restoring a gate to operation without verifying that switch can leave a homeowner with an immediate code violation, and that’s a problem nobody needs after a repair.
Pricing for Gate Repair in Los Angeles
Gate repair in Los Angeles is not a mystery if the person quoting you is being straight. Here are the ranges we see most often:
- Gate repair service call and diagnosis: $45-$85 (waived with repair)
- Hinge replacement (single hinge, welded on site): $115-$210 depending on post condition
- Track adjustment or replacement: $175-$400 for sliding gates, more for cantilever
- Gate arm or gate wheel replacement: $85-$185
- Capacitor or limit switch repair on an operator: $90-$240
- Full operator replacement (motor, board, arm): $650-$1,800 depending on gate size and brand
- Post re-setting (masonry pillar): $350-$900 - hillside lots run higher
Every quote is given before any work starts, and it does not change at the door. If another company wrote you an estimate and something about it doesn’t sit right, bring it to Hal. He’ll look at it and give you a free second opinion. You can also take $40 off any repair over $200, and there is a permanent 10% discount for seniors and veterans. No haggling, no conditions hidden in the fine print.
Service Area - Cities Near Los Angeles
We are based in Los Angeles and work throughout the metro. If you’re in a nearby community, we’re often out that way as well: West Hollywood, Beverly Hills, Santa Monica, and Studio City. Same repair-first approach, same 90-Day Done Right Promise. Call the shop and tell us where the gate is.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Los Angeles
Most repairs run between $85 and $400 for common issues like hinges, tracks, gate wheels, and capacitors, while a full operator replacement typically starts around $650. Hillside properties with steep driveways or masonry pillars tend to fall at the higher end because the work is more involved. The price is quoted and agreed before any work starts, and you get a free second opinion on any written estimate. Call (818) 873-5061 for an exact quote.
Yes - we run same-day repair service inside Los Angeles, and if your gate is stuck in a way that traps a car or leaves the property open, Hal will tell you exactly when he can be there. Repairs are the priority; installations are scheduled. For an emergency gate repair in Los Angeles, call (818) 873-5061 and a live person will answer.
Yes. More than half of the repair work Hal does is on gates and operators that were installed by someone else. The most common issue is a hinge post that was never set deep enough, or an operator that was undersized for the gate’s weight and wind load. Hal fixes what is actually wrong, not what is easiest to bill.
Yes. Hal is certified to service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your opener is making a grinding noise, running but not moving the gate, or not responding to the remote, call (818) 873-5061 and describe what you’re hearing; Hal will give you a straight answer about whether it’s worth repairing.
A full installation includes measuring the driveway, checking the grade and any slope, setting or re-setting posts, fabricating and hanging the gate, and installing the operator and safety edges. If you are in a Los Angeles hillside fire zone, Hal will also verify that the Knox Box or fire department key switch is functioning. You get a written price before any work begins, and you never pay for a gate that was not what you agreed to. Call (818) 873-5061 for a free measure and quote.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Los Angeles since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Angeles Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks