Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Sherman Oaks?
For most homeowners in Sherman Oaks, our Gate Installation services typically cost between $1,800 and $4,500, depending on the material, motor requirements, and site preparation. If you are looking at a basic manual pedestrian gate, you might spend closer to $800, while a custom-fabricated automatic driveway gate with access controls can range from $5,000 to over $9,000. Because we have been operating here since 2001, we know that Sherman Oaks properties often have unique drainage or slope challenges that can influence the final price, so we always provide an upfront estimate before any work begins.
Gate Installation Cost Breakdown (2026)
When you are budgeting for a new gate, it is helpful to look at the components separately. In the Sherman Oaks market, labor and materials are the two biggest variables. The following table outlines the typical price ranges we see for projects in our area.
| Gate Type/Component | Estimated Price Range |
|---|---|
| Manual Pedestrian Gate (Installation Only) | $800 - $1,600 |
| Standard Steel Driveway Gate (Single Swing) | $2,200 - $3,800 |
| Automatic Driveway Gate (System + Motor) | $4,500 - $8,500+ |
| Custom Fabrication/Welding (Per Hour) | $150 - $250 |
| Access Control/Intercom Systems | $600 - $1,500 |
These numbers assume standard soil conditions and existing electrical access. If your property in Sherman Oaks requires trenching for power or significant concrete work for footings, those costs will be added to the base installation price. We believe in being transparent about these variables early on. If you want a specific number for your Driveway Gate, call (818) 873-5061, and we can discuss the specifics of your site.
What Affects Gate Installation Pricing in Sherman Oaks
Not every gate installation is the same, and the price difference usually comes down to the specific needs of your property. We have been doing this long enough to know that a “one-size-fits-all” quote is usually a sign of trouble. Here is what actually drives the cost in our neighborhood:
- Material Choice: Wrought iron is a staple in many older Sherman Oaks homes, but it requires more maintenance and fabrication time than aluminum or chain link. Wood gates offer privacy but may require more frequent upkeep due to our local sun exposure.
- Automation and Motors: The cost of the motor depends on the weight and frequency of use. We service nine major brands, including LiftMaster, FAAC, and DoorKing, and each has different power requirements that impact the installation complexity.
- Site Access and Slope: Many driveways in the hills of Sherman Oaks are not perfectly level. Installing a gate on a slope requires specialized hardware and custom fabrication to ensure the gate clears the ground when it swings, which adds to the labor time.
- Electrical Infrastructure: If you are moving from a manual gate to an automatic one, you need a dedicated power line. Running conduit and trenching across a driveway adds labor hours and material costs that are often overlooked in initial estimates.
- Permits and Codes: While standard repairs often don’t trigger a permit, new installations that change the property line or significantly alter the curb appeal may require local planning approval. We are familiar with what the city expects, which helps avoid costly delays.
If you are considering a new gate, you can always return home to review our full range of services or look specifically at our Gate Installation in Sherman Oaks page for more details on our process.
How to Save on Gate Installation
You don’t need to overpay to get a high-quality gate. The best way to save money is to avoid “disposable” installations that require replacement in five years. We focus on repair-first solutions. If your existing gate structure is sound, we can often retrofit it with new hardware or a modern motor rather than tearing the whole system out. This saves on material costs and reduces waste.
Another way to manage costs is to be clear about your needs. Do you really need a high-end intercom system with video, or is a simple keypad sufficient? We are happy to talk through these options with you. We also offer a permanent 10% discount for seniors and veterans, and we never charge a trip charge inside the county. If you have an existing estimate from another company, we are happy to provide a free second opinion. Just call (818) 873-5061 to speak with us directly.
Step-by-Step: Getting an Accurate Quote
Getting a fair price shouldn’t be a guessing game. Here is how we handle estimates at Gatewood Fence & Gate:
- Initial Consultation: We ask for photos or a site visit to assess the condition of your posts and hinges. A gate sags in the hinge post, not in the middle, and that is where we start our inspection.
- Component Review: We determine if the existing frame can be salvaged or if it needs to be replaced. We prefer to fix the panel without the post whenever possible to keep your costs down.
- Motor Selection: We match the motor to the weight of your gate. Using an undersized motor is a common error that leads to premature failure; we size it correctly the first time.
- Upfront Pricing: You get a written estimate with no hidden fees. Our 90-Day Done Right Promise is included in writing on every job.
- Installation: We arrive on time, perform the work, and clean up. The name is on the shop, and the shop is down the road, so we make sure the work is done right.
FAQs - Gate Installation Cost
How much does it cost to motorize an existing gate in Sherman Oaks?
Motorizing an existing gate typically costs between $1,500 and $3,500, depending on the motor brand and the amount of electrical work required. We often install systems from Viking or Ghost Controls, which are reliable for our local climate. Call (818) 873-5061 for an exact quote based on your gate’s weight and condition.
Is it cheaper to repair a gate or replace it entirely?
In most cases, repairing a gate is significantly cheaper than a full replacement, usually costing a fraction of a new installation. We are experts in on-site welding, which allows us to fix structural issues without hauling the gate away or replacing parts that don’t need swapping. If we can save your current gate, we will.
Do I need a permit for a new gate installation in Sherman Oaks?
Whether you need a permit depends on the height and location of the gate relative to the street. Most simple replacements do not require a permit, but new fences or gates that alter property access may have specific city guidelines. We can help you determine if your project requires a permit during our initial assessment.
How long does a typical gate installation take?
A standard gate installation usually takes one to two days, depending on the complexity of the concrete work and the automation setup. We pride ourselves on showing up when we say we will, and because we do our own on-site welding, we don’t have to wait on third-party fabrication shops to finish your project.
Why do some companies charge a trip charge and you do not?
We do not charge a trip charge inside the county because we believe in serving our neighbors without nickel-and-diming them. Our shop has been locally owned and operated since 2001, and we keep our business model simple to provide you with the most value. If you have any questions, call (818) 873-5061 to speak with a live person, 24/7.
Pricing reflects the Sherman Oaks market as of 2026. Gatewood Fence & Gate offers free estimates - call (818) 873-5061.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sherman Oaks since 2001.
What Our Customers Say
"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield