Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterPedestrian Gate Repair and Installation in Sherman Oaks
If your pedestrian gate is sagging, dragging on the driveway, or the latch just won’t catch anymore, you don’t need a whole new system-you usually just need a real repair. We fix pedestrian gates in Sherman Oaks the right way, typically ranging from $150 to $450 depending on whether you need a simple hinge adjustment, welding work, or a new latch mechanism. We are local, we are owner-operated, and when you call (818) 873-5061, you get a live person who actually knows how to swing a hammer, not a call center in another state. If you are looking for a complete overhaul, we handle Gate Installation in Sherman Oaks as well, keeping the same focus on quality and longevity.
We have been doing this since 2001. My name is Hal Gatewood, and my name is on the shop. I don’t believe in “dispatching” someone to your house to sell you a new gate when a solid day of welding and hinge reinforcement will give you another decade of use. If you are tired of national outfits that give you the runaround, call us. We show up when we say we will, and we stand behind our work with a 90-Day Done Right Promise that is written on your invoice, not buried in fine print.
When You Need Pedestrian Gate Service
In Sherman Oaks, the climate and the soil can be tough on gates. Between the dry heat and the occasional heavy rain, ground shift is real. When your gate starts acting up, it is usually telling you something specific about the hardware or the post.
* The gate drags on the pavement: This is the most common call we get. It usually means the hinge post has shifted or the hinges themselves are worn out. We don’t just lift it; we check the footing and the weld integrity.
* The latch won’t align: If you have to lift the gate to get it to click shut, your geometry is off. It is rarely the latch; it is almost always the gate frame sagging or the post leaning.
* The gate swings open on its own: This is a safety issue. If your gate isn’t self-closing, it might be a hinge tension problem or a simple leveling issue. We can adjust or replace your hinges to get it closing properly.
* Visible rust or broken welds: Humidity in the valley can eat at iron gates. We bring our welding equipment right to your driveway to fix cracks before they turn into structural failures.
* The gate feels “heavy” or binds: If your gate used to swing like a feather and now feels like dead weight, the bearings in your hinges are likely shot. We replace these with high-quality components that can handle the weight of the gate.
* Security concerns: If the gate doesn’t lock securely, your entire perimeter is compromised. We specialize in retrofitting hardware to ensure your pedestrian access point is as secure as your main driveway gate.
Our Pedestrian Gate Process
We don’t do “band-aid” repairs. When I show up at your home, I am looking at the root cause, not just the symptom. Here is how we handle a typical pedestrian gate job:
1. Initial Assessment: I come out to your property and watch the gate move. I check the post-to-ground connection first. If the foundation is bad, the gate will never work right, no matter how much we weld.
2. Structural Integrity Check: We inspect the frame for stress fractures. If your gate frame is twisting, we reinforce it with steel bracing. We don’t just slap paint over the problem.
3. Hinge and Hardware Service: We replace or adjust the hinges. We often use heavy-duty sealed bearings that don’t require constant greasing. If you have a brand like Viking or Linear, we make sure the hardware matches the specs.
4. On-Site Welding: If we find a crack or a weak joint, we weld it right there in your driveway. We don’t need to take your gate to a shop. We have the equipment, the power, and the skill to do it on the spot.
5. Final Alignment and Testing: We hang the gate, level it, and test the latch closure a dozen times. We don’t leave until it swings smoothly and latches with a firm click.
6. The 90-Day Done Right Promise: Once the job is done, we put it in writing. If it isn’t right, you call me, and I come back. That is the only guarantee that matters.
Pedestrian Gate Pricing in Sherman Oaks
We believe in upfront pricing. You will know what the job costs before we start, and we don’t change the price once we are at your door. We also offer a $40 discount on any repair over $200 and a 10% permanent discount for seniors and veterans.
| Service Type | Typical Price Range |
| :— | :— |
| Hinge adjustment and lubrication | $150 - $225 |
| Latch replacement and alignment | $175 - $275 |
| On-site welding/structural repair | $250 - $450 |
| Complete hinge rebuild (heavy duty) | $300 - $500 |
| New pedestrian gate hardware install | $200 - $400 |
*Note: These ranges cover labor and standard materials. If you have a custom gate that requires specialized steel or complex fabrication, we will give you a firm, no-hassle quote during our visit. Call (818) 873-5061 for a free estimate.*
FAQs - Pedestrian Gate
How much does it cost to fix a sagging pedestrian gate in Sherman Oaks?
Most sagging gate repairs in Sherman Oaks range between $150 and $450, depending on whether we need to weld, replace hinges, or reset the post. We provide a firm quote before starting any work, so you don’t have to worry about surprise fees. Call (818) 873-5061 to get an exact quote for your specific gate.
Can you match the hardware on my existing gate?
Yes, we can source and install hardware that matches or upgrades your existing setup, whether you are running BFT, Ghost Controls, or other major brands. We focus on using high-quality, durable components that won’t fail in a year. If you have a specific brand or style you are trying to maintain, let us know when you call.
Is it better to repair my pedestrian gate or replace it?
Usually, you should repair it. Most gates are built with sturdy steel that can last decades if the hinges and welds are maintained. We only recommend replacement if the frame is completely rusted through or the post footing is non-existent. We will give you an honest opinion-if I can fix it, I will tell you, and I will fix it for less than the cost of a new gate.
Do you offer same-day service for emergency repairs?
We prioritize calls where a gate is stuck open or creating a security risk. While we can’t always guarantee a same-day arrival for every request, we do our best to get to Sherman Oaks homes quickly. Because we are locally owned and owner-operated, we don’t have to wait for a home office to approve a schedule change. Call (818) 873-5061 to see when we can get out to your place.
Contact Gatewood Fence & Gate Today
If your pedestrian gate is giving you trouble, stop fighting with it. You shouldn’t have to lift your gate or struggle with a rusty latch every time you walk out to the mailbox. We have been serving the Sherman Oaks area since 2001, and we have built our reputation on showing up, doing the work right the first time, and charging a fair price. We are licensed and insured, and we offer a free second opinion on any written estimate you have already received. If you want a gate that actually works, call (818) 873-5061 today. Let’s get it fixed.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, offering Gate Installation services in Sherman Oaks since 2001.