Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Sylmar
If your gate frame is twisted off its track after a Santa Ana blow, the hinge post is leaning, or a weld cracked on a ranch gate along Hubbard Street, that’s exactly the kind of work we show up for. Gate parts and welding in Sylmar runs into conditions most of the Valley never sees: sustained wind gusts off the Newhall Pass, caliche soil that heaves posts out of plumb, and horse-property gates that weigh enough to shear ordinary hardware. We fix the gate where it stands, weld on site, and stand behind every job with our 90-Day Done Right Promise in writing. Call (818) 873-5061 and you’ll get a live person, not a recording.
Why Gatewood Fence & Gate Is Sylmar’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and his name is on every invoice. We’re not a call center and there’s no dispatcher three states away deciding when you matter. When you call about a gate in Sylmar, the person who answers knows what the Newhall Pass does to a sliding gate frame because we’ve welded dozens of them back square.
Sylmar customers call us for one reason more than any other: we repair what other companies want to replace. A gate sags in the hinge post, not in the middle, and that is where we start. If a post can be re-plumbed with a new footing collar and a gusset plate, we do that instead of selling you a whole new gate. You get a straight answer on the phone, a written price before we start, and a 90-day promise stamped on the work. That’s the whole deal.
Our crews serve Sylmar directly, coordinated from our Los Angeles office, so we’re minutes from San Fernando Road, Foothill Boulevard, and the horse-property pockets off Polk and Hubbard. Background-checked, uniformed, and trained on nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Sylmar
Hinge Replacement
Wind load off the Newhall Pass works hinge barrels harder than almost anywhere in Los Angeles County. On a Sylmar dual-swing ranch gate, the top hinge takes the brunt of every gust, and once it wears oblong, the gate drops and drags. We replace hinges with heavier-barrel hardware sized for the gate’s actual weight, not the spec the builder guessed at. If the leaf is still sound, we weld the new hinge into place and re-plumb the post so the gate swings true.
Post Replacement
This is the most common repair we do in Sylmar, and the reason is under your feet. Caliche soil on the old ranch parcels expands during winter rain and contracts hard in the dry season, working posts loose inside their footings. A post that’s moved out of plumb by an inch binds the latch, torques the hinges, and overstresses every weld on the gate. We cut out the old post, set a new one in a properly sized concrete footing collar, and brace it so the next Santa Ana event doesn’t repeat the damage. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Slide gates in Sylmar take a beating that slide gates in Granada Hills mostly don’t. Sustained gusts hit the broad face of a solid infill gate and try to twist the entire frame; the top rail takes that torsion and eventually cracks at a weld joint or pulls free. We cut out the failed section, weld in new steel, and add stiffeners where the frame flexes. Then we re-align the gate on its rollers and check the rack-and-pinion teeth for wind damage. Show me the gate closing on its own and I’ll show you where it’s failing.
Custom Welding
Not every gate fix is a stock part. Horse properties in Sylmar often have custom-built ranch gates, decorative ironwork, or odd-sized frames that no catalog part will match. We weld on site, which means your gate stays in your driveway while we work. We’ve fabricated gusset plates, extended frames for resized openings, rebuilt hinge barrels, and added wind bracing to solid infill gates that flexed in high gusts. If it’s steel, we can put it back together.
We also carry and replace Gate Parts & Welding hardware of every common type: gate rollers, latch and lock sets, rack-and-pinion teeth, opener arms, and hinge pins. If the part exists, we’ll find it. If it doesn’t, we’ll make it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sylmar
We service and stock parts for the operators Sylmar homeowners actually have on their gates, including LiftMaster, Elite, FAAC, and Mighty Mule. That covers most of the automatic openers on ranch gates off Hubbard, Polk, and the rural-zoned parcels along Foothill. Because we see the same brands repeatedly across the area, we keep common replacement parts on the truck: control boards, limit switches, photo-eyes, and opener arms. In most cases we can complete the repair in one trip, no waiting on a parts shipment. If your opener is working against the wind and losing, we’ll tell you whether it needs a repair or a heavier-duty unit sized for Sylmar’s actual conditions.
Common Gate Parts & Welding Problems We See in Sylmar Homes
- Santa Ana wind shear on solid infill gates. Sustained gusts off the Newhall Pass hit broad gate faces like a sail, twisting sliding gates off their tracks and warping steel infill panels. We add wind bracing and stiffeners so the frame stops flexing at the welds.
- Hinge posts leaning out of plumb on horse properties. Caliche soil under Sylmar’s ranch parcels swells in winter rain and shrinks in dry season, loosening post footings and binding latch hardware. We re-plumb and re-foot posts as a routine part of nearly every service call in this area.
- Cracked welds at hinge barrels and top rails. Years of wind torque concentrate stress at the same few weld joints, and eventually they crack. We cut out the old weld and lay in a stronger one, often with a gusset plate at the top hinge.
- Opener damage after windstorm power cuts. When power drops during a Santa Ana event, automatic operators go dead. If someone forces the gate manually without using the release, internal gears shear. We rebuild openers and replace bent arms, then show you the correct release procedure so it doesn’t happen twice.
Pricing for Gate Parts & Welding in Sylmar, CA
A hinge replacement on a typical Sylmar swing gate runs $180-$380 depending on gate weight and hardware size. Post replacement with a new concrete footing collar runs $350-$700 per post; ranch gates with two failing posts commonly land in the $600-$1,200 range when both are done together. Rail repair and re-welding runs $150-$450 depending on the length of the cracked section and whether stiffeners are needed. Custom welding jobs like gusset plates or frame extension run $120-$400 per fabrication, quoted before we strike an arc.
These are Sylmar prices, not Spokane prices, and not a national average. Every job is quoted and agreed in writing before any work starts. $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (818) 873-5061 and Hal will give you a number you can take to the bank.
We Also Serve Cities Near Sylmar
We work throughout the northern San Fernando Valley. If you’re in San Fernando, Granada Hills, Panorama City, or Northridge, the same crew and the same 90-Day Done Right Promise apply. Our Gate Parts & Welding in Sylmar customers often have family or rental properties in these neighboring communities, and we’re happy to handle them all. One call covers the whole corner of the Valley.
Serving Sylmar, CA - Our Local Coverage Area
We’re based in the Sylmar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Sylmar
Yes. Sylmar sits directly at the mouth of the Newhall Pass, and wind gusts here hit residential gates with sustained lateral force that Granada Hills and San Fernando rarely see. A standard top-rail weld that lasts a decade in Northridge can crack in two Santa Ana seasons in Sylmar. We weld Sylmar gates with deeper penetration at stress joints, add gusset plates at top hinge barrels, and add cross-bracing to solid infill panels so they don’t flex and crack at the frame welds. Call (818) 873-5061 and we’ll look at what the wind has been doing to your gate.
The post footings shifted. Sylmar’s horse-property parcels, concentrated along streets like Hubbard and Polk, sit on caliche-heavy soil that swells when wet and contracts hard in dry weather. That cycle loosens post footings and moves hinge posts out of plumb, so the latch bolt no longer lines up with the strike plate. We re-plumb the post, set a new footing collar, and adjust the strike plate so the gate closes clean. It’s a routine part of every service call in this area.
Yes. Much of Sylmar sits in a Very High Fire Hazard Severity Zone, and many homeowners are moving from wood infill to steel or aluminum. We can remove the wood panels from your existing gate frame and weld in non-combustible steel infill, keeping your hinge posts and opener working. It’s less expensive than a full gate replacement and meets the fire-zone material requirement. We’ll quote it in writing before any work starts.
Pull the manual release cord or turn the release key on the operator first, then move the gate by hand. Never force an automatic gate without releasing the operator first; doing so shears internal gears and bends arms, turning a power outage into an operator rebuild. If your operator is already damaged from a forced opening, call (818) 873-5061 and we’ll repair or replace it. We also show every Sylmar customer where the release is and how to use it before we leave.
Once a year, after the last big wind event and again after winter rains. A post that’s shifted half an inch is easier and cheaper to correct than one that’s moved three inches. We inspect footings, hinge welds, latch alignment, and opener mounting as part of a single visit. If you’re on a horse property off Hubbard or Polk, call us and we’ll put you on a yearly inspection schedule. The estimate is free.
Call Gatewood Fence & Gate for Gate Parts & Welding in Sylmar
Your gate is the first thing between your horses, your home, and the street, and in Sylmar it’s also the thing the wind tests every October. If it’s twisted, sagging, or bound up, call (818) 873-5061 for a free estimate. You’ll talk to a person, get a price before we start, and every weld carries the 90-Day Done Right Promise in writing. I will be there myself, or you can come to the shop and look me in the eye.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sylmar and the northern San Fernando Valley since 2001.