Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Reseda
Gate parts and welding work in Reseda usually means one of three things: a hinge post that’s cracked at grade from the Northridge earthquake, a steel frame that’s binding in 110°F Valley heat, or an operator gear set that stripped because nobody thought to check the footing before hanging a motor on it. We handle all three, and we do the welding right there in your driveway so the gate never leaves your property. Hal Gatewood has been at this since 2001, and when you call (818) 873-5061, a live person picks up. Not a call center. Not a menu tree. You’ll talk to someone who knows the difference between a Reseda block wall post from 1962 and one from 1978.
We serve the whole Reseda area, from the flats around Reseda Boulevard up to the streets north of Sherman Way and over toward Encino’s edge. If you need Gate Parts & Welding done right, we’re the crew that shows up on time and fixes the actual problem instead of slapping a band-aid on it.
Why Gatewood Fence & Gate Is Reseda’s Preferred Gate Parts & Welding Company
We’ve been repairing gates in Reseda long enough to know what this neighborhood throws at a fence. Block wall posts that look plumb from across the yard but rock at grade when you lean on them. Wrought iron from the 1960s that’s been welded three times by three different people, each repair weaker than the last. Slide gates that bind every afternoon when the sun hits the rail and the steel expands a full quarter inch. None of this surprises us anymore, and none of it gets a temporary fix from us either.
Hal’s name is on the shop and on every invoice. The address is published and the license number is right there for anyone to look up. That’s not marketing. That’s accountability. When we tell a Reseda homeowner their post needs re-pouring and they look skeptical, we hand them a level and tell them to check it themselves. Most do. Then we get to work.
Every job carries the 90-Day Done Right Promise in writing. If the weld cracks or the hinge binds or the operator acts up within 90 days, one call brings us back. No runaround, no fine print. We also answer the phone 24/7 because gates fail at 9pm on a Sunday more often than they fail on a Tuesday at noon. When yours does, you’ll get a person on the line.
Our Gate Parts & Welding Services in Reseda
Hinge Replacement
Hinges on Reseda gates take abuse from two directions: daily heat cycling that fatigues the metal, and Santa Ana winds that apply lateral load the hinge was never sized for. We replace worn hinge pins, rebuild hinge plates, and weld new barrel hinges onto existing frames when the old ones are beyond saving. We always check the post before we touch the hinge because a hinge that’s binding is usually telling you something about the footing underneath it.
Post Replacement
This is the big one in Reseda. The 1994 Northridge earthquake’s epicenter sat near Reseda Boulevard and Arminta Street, which means block wall gate posts across this entire neighborhood absorbed ground movement more intense than almost anywhere else in the Valley. We routinely pull posts that look fine above grade and find the footing cracked, shifted, or completely detached below the surface. We cut out the old post, pour a new footing to proper depth, set a new post, and weld the gate back onto hardware that’s actually anchored to something solid.
Rail Repair
Slide gates in Reseda ride on rails that take a beating from 105°F expansion and years of grit working into the roller track. When a rail flexes or the gate starts dragging, homeowners often blame the rollers. Half the time it’s the rail itself, kinked or corroded or simply worn through from decades of the same gate cycling over the same spot. We straighten, splice, or replace rails and then set the gate travel so it moves true again.
Custom Welding
Most Reseda gates from the 1950s through 1970s were built with square tube and flat bar stock that’s no longer a stock item anywhere. When a picket snaps or a corner joint fractures, you can’t just order a replacement panel. We weld on site: patching cracked frames, reinforcing rotted bottom rails, fabricating new pickets to match the existing pattern, and building custom gate sections when a repair patch would look like a patch. The point is a gate that works and looks like it belongs on the house, not a museum of previous repairs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
We’re certified on LiftMaster, FAAC, Elite, and a half-dozen other major operator brands, and we keep common parts on the truck for Reseda call-outs: gear sets, limit switches, control boards, and safety edges. When you’ve got a LiftMaster swing arm that stripped its gear in July heat or a FAAC hydraulic operator that’s leaking because the seals baked, we don’t order parts and make you wait two weeks. We fix it, usually the same visit. That’s the whole reason we carry inventory instead of just quoting lead times.
Common Gate Parts & Welding Problems We See in Reseda Homes
- Earthquake-compromised post footings. The Northridge quake cracked concrete in ways that still show up 30 years later. A gate that sags or a hinge post that leans more every year usually has a footing problem underneath, not a hardware problem up top.
- Heat-expanded metal frames binding in slide tracks. Reseda’s summer highs hit 105-110°F, far hotter than the coastal assumptions baked into gate hardware specs. Steel expands, tracks bind, welds fatigue, and operators overheat pulling against resistance they weren’t designed for.
- Santa Ana wind damage to hinges and latches. Fall wind events hit older gates with lateral force the original 1960s hardware never anticipated. Worn hinge pins shear, latch bolts bend, and retrofit operators strain against the extra load.
- Stripped plastic gear sets on automatic openers. Manufacturers rate plastic gears for moderate climates. Reseda is not moderate. When the gate binds in heat and the operator fights it, the plastic gear strips and the motor spins uselessly. We replace gear sets regularly across the neighborhood.
Pricing for Gate Parts & Welding in Reseda, CA
Here’s what you can expect to pay in Reseda for the most common repairs. Hinge replacement typically runs $125-$275 per hinge depending on the size and whether we’re welding new plates or rebuilding existing ones. Post replacement with footing re-pour runs $450-$850 per post; that includes cutting out the old post, digging and pouring the new footing, setting the post, and reattaching the gate. Rail repair or replacement ranges from $180-$400 depending on length and damage. Custom welding runs $95-$150 per hour plus materials, and most on-site welding jobs in Reseda take one to three hours. Every price is quoted and agreed before any work starts, so the number you approve is the number you pay. We also take $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. Call (818) 873-5061 for an exact quote. Estimates are free.
We Also Serve Cities Near Reseda
We serve Reseda and the surrounding communities, including Tarzana, Northridge, Encino, and Panorama City. If you live just outside Reseda and need gate parts or welding, call us and we’ll get you scheduled. The same crew that works Reseda handles the whole area, and the same 90-Day Done Right Promise applies wherever your gate is.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Reseda
Because the Northridge earthquake epicenter sat near Reseda Boulevard and Arminta Street, block wall gate post footings across Reseda absorbed the strongest ground movement in the Valley, and many of them cracked or shifted in ways that still show up today. If you replace a hinge or re-hang a rail on a post whose footing is compromised, the repair fails within months because the post itself is still moving. We inspect every post with a level and lateral pressure before quoting any repair in Reseda. Call (818) 873-5061 to have your gate posts checked before you spend money on hardware.
Yes, significantly. Reseda sits on the flat San Fernando Valley floor and regularly hits 105-110°F in summer, 20+ degrees hotter than Santa Monica or Venice on the same day. That heat expands steel gate frames enough to bind slide tracks and stress welded joints, and it pushes operator motors past their rated thermal limits after just a few years instead of the 10-15 years manufacturers assume. Coastal LA gates rarely see the same thermal cycling. If your Reseda gate binds in the afternoon and loosens at night, heat expansion is likely the cause, and the fix is usually in the rail clearance and hinge alignment, not the motor. Call (818) 873-5061 and we’ll diagnose it on site.
The short answer is you usually can’t tell by looking, because the damage is typically below grade or hidden under stucco. But there are signs: the gate sags more each year even after hinge tightening, the post leans slightly toward the gate’s swing direction, you see hairline cracks in the stucco at ground level, or the gate wobbles when you push on it laterally. Any of those means the footing should be inspected before you spend money on hinges or rollers. We bring a level and apply controlled lateral pressure to see what’s actually moving. Call (818) 873-5061 for a footing assessment. Free estimates.
If the post is truly solid and plumb, yes, we can weld a new hinge plate or barrel hinge directly onto the existing post and have the gate swinging the same day. In Reseda, though, we check the footing first because so many block wall posts here are compromised from the Northridge quake. If the post is rocking or cracked at grade, welding a new hinge onto it just transfers the problem to a more expensive repair later. We’ll tell you straight which situation you have, and we only re-pour when the post actually needs it. Call (818) 873-5061 for an honest assessment.
Plastic gear sets inside operator gearboxes are the most common failure we see in Reseda, because the heat makes them soften and the binding from heat-expanded gates strips them under load. Limit switches are next, failing from thermal cycling and grime. Santa Ana winds then finish the job by adding lateral stress to hinges and latches that already have reduced tolerance from heat fatigue. If your automatic gate opens partway and stops, or grinds instead of moving smoothly, those are the likely culprits. We stock replacement gear sets and switches for LiftMaster, FAAC, Elite, and other major brands. Call (818) 873-5061 and we’ll get it fixed.
Call Gatewood Fence & Gate for Gate Parts & Welding in Reseda
If your Reseda gate is sagging, binding, or failing outright, call (818) 873-5061 for a free estimate. Hal Gatewood has been at this since 2001, his name is on the shop, and the 90-Day Done Right Promise means the job is right or we come back and make it right. You’ll talk to a live person whenever you call, and the price you’re quoted before work starts is the price you pay. No haggling, no surprises, no runaround. Whether you’re on a 1950s ranch north of Sherman Way or a later build south of Vanowen, we’ll be there when we say we will.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Reseda since 2001.