Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterElectric Gate Repair in Sherman Oaks, CA
Electric gate repair in Sherman Oaks typically runs between $250 and $650 for common motor and sensor issues, depending on whether you need a simple logic board reset, gate arm adjustment, or a complete operator replacement. If your gate is stuck, making grinding noises, or refusing to open for your remote, you need a fix that lasts, not a temporary patch. At Gatewood Fence & Gate, we handle everything from basic sensor realignments to complex circuit board troubleshooting, and I personally make sure every job is done right the first time. We’ve been serving the Sherman Oaks community since 2001, and because my name is on the business, I don’t believe in cutting corners or selling you parts you don’t need. When you call (818) 873-5061, you get a real person who understands the local terrain and the specific gate issues common to our neighborhood. Whether you are dealing with a faulty Gate Repair in Sherman Oaks or need a motor serviced, I will show up in the window I promised.
When You Need Electric Gate Repair
Electric gates are reliable until they aren’t, and usually, the warning signs are there if you look for them. In Sherman Oaks, where we deal with significant temperature swings that can expand metal components and affect sensitive electronics, specific issues like gate realignment tend to crop up more often than others. If you see these signs, it is time to give us a call before the gate leaves you stranded in your driveway:
- The gate is moving slower than usual: If your motor sounds like it is struggling or moving at a fraction of its normal speed, it is often a sign of a failing capacitor or a dying motor, not just a lack of lubrication.
- Grinding or screeching noises: Metal-on-metal sounds usually indicate that the gears inside your motor assembly are worn down or that the chain tension is completely off. Ignoring this leads to a full motor failure that is much more expensive to fix.
- Sensors are false-tripping: If your gate stops or reverses for no reason, especially when the sun hits the photo-eyes at a certain angle, the alignment is likely off or the lenses have become cloudy from our local dust and UV exposure.
- The gate won’t open with the remote: While this can be a simple battery issue, if fresh batteries don’t fix it, the problem is often the receiver board or an antenna obstruction common in areas with dense signal interference.
- The gate sags or drags on the driveway: A gate that drags isn’t just an inconvenience; it puts massive, unnecessary strain on your operator, which will eventually burn out the motor trying to overcome the friction.
If you are experiencing any of these issues, don’t wait for the gate to stop working entirely. We handle Gate Repair with a focus on fixing the root cause, not just the symptom. Call (818) 873-5061, and we will get it sorted.
Our Electric Gate Repair Process
I learned a long time ago that the best way to fix a gate is to stand there with it and see what it is actually doing, not what a manual says it should be doing. Here is how we approach your electric gate repair in Sherman Oaks:
- Initial Assessment: I or one of my crew members will arrive and watch the gate cycle through a full open and close. We check the hinges, the post, and the operator, because the motor is only as good as the gate it’s attached to.
- Diagnostic Testing: We use a multimeter to check the voltage at the operator and test the logic board for error codes. We work with major brands like Viking, BFT, and Linear regularly, so we know the common failure points for these specific units.
- On-Site Repairs: We carry a stocked truck for a reason. Whether it is welding a cracked hinge bracket or replacing a sensor relay, we aim to complete the repair right there in your driveway so you aren’t left with an open gate overnight.
- Safety & Tension Check: Once the mechanical repair is done, we calibrate the force settings. An electric gate should be sensitive enough to stop when it hits an obstruction but strong enough to hold against a Sherman Oaks breeze.
- Verification: We run the gate through at least five full cycles while you watch. We aren’t satisfied until you are, and every repair is backed by our 90-Day Done Right Promise.
Safety Note: Electric gate operators use high-voltage electricity and powerful springs or hydraulics. Please do not attempt to open the motor housing or adjust internal springs yourself, as these components can cause serious injury if they release suddenly. Leave the heavy lifting to us.
Electric Gate Repair Pricing in Sherman Oaks
I hate hidden fees as much as you do, which is why we keep our pricing straightforward. We don’t have a trip charge if you are inside the county, and we always provide a clear estimate-check our 2026 gate repair cost guide-before we turn a wrench. If you have a written estimate from another company, I am happy to give you a free second opinion so you know if you are being overcharged.
| Service Type | Estimated Cost Range |
|---|---|
| Basic Sensor Alignment/Cleaning | $150 – $250 |
| Logic Board or Receiver Replacement | $300 – $600 |
| Operator Motor Repair/Capacitor Swap | $250 – $550 |
| Hinge Welding and Structural Repair | $200 – $450 |
Remember, we offer $40 off any repair over $200, and seniors and veterans always receive a permanent 10% discount. Call (818) 873-5061 for an exact quote on your specific gate.
FAQs - Electric Gate Repair
Is it cheaper to repair my old electric gate motor or replace it entirely?
Most of the time, it is cheaper to repair-see gate repair costs in Los Angeles-especially if you have a high-quality unit from brands like Elite or Viking that just needs a new capacitor or logic board. If your motor is over 15 years old and the internal gears are stripped, replacement becomes the smarter long-term move, but I will always tell you the honest truth about whether a repair is worth your money or if you are just throwing good money after bad.
Can you fix my gate today?
I know that a broken gate is a security risk, not just a minor annoyance. While I can’t promise a specific hour without looking at the schedule, we prioritize calls where the gate is stuck in an open position or preventing you from leaving your home. If you call (818) 873-5061, we will do our best to get a technician out to your Sherman Oaks property as quickly as possible.
Do you work on all gate brands?
We are certified to service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we have been doing this since 2001, we have seen almost every model installed in this area, so chances are high we have the parts and the experience to handle yours.
What is the 90-Day Done Right Promise?
It is exactly what it sounds like: if we fix your gate and the same issue pops up within 90 days, I will come back and make it right, period. No runaround, no arguing, and no extra service fees. It is stamped in writing on every job because I stand by my work and I value my reputation in Sherman Oaks.
If you need expert help with your electric gate, don’t leave it to chance. Call (818) 873-5061 today for a free estimate and talk to someone who actually knows how to fix gates.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sherman Oaks since 2001.