Gate Parts & Welding in North Hollywood - Made to Measure, Written Price

Fast, Reliable Gate Parts & Welding Across North Hollywood

Gate parts and welding in North Hollywood usually means one of two things: a hinge post that has finally rusted through, or a gate that hasn’t hung straight since 1994. Most repair calls we run in the 91601, 91602, and 91605 zip codes come down to metal fatigue, earthquake-shifted footings, and operators that were never meant to survive three decades of Valley heat. We fix the gate where it sits, in your driveway or at your apartment complex off Vineland or Lankershim, and we quote the price before any torch gets lit. Call (818) 873-5061 and you’ll get Hal or one of his crew, not a phone tree.

Call (818) 873-5061

What makes North Hollywood different from Burbank or Sherman Oaks isn’t the style of gate. It’s what’s underneath it. More on that below, because it changes the whole repair calculus.

Why Gatewood Fence & Gate Is North Hollywood’s Preferred Gate Parts & Welding Company

Hal Gatewood started this shop in 2001, and his name is on every invoice and every job we do in North Hollywood. That matters in a neighborhood where half the gates we touch were installed before the internet existed. The person who shows up at your property is the same person you’ll see again at the hardware store on Victory Boulevard, and if something isn’t done right, the 90-Day Done Right Promise means one call brings us back. No runaround, no third-party warranty company, no “that was the previous tech.” Written on the job ticket, every time.

We’ve worked on gates all over North Hollywood, from the garden-style apartment complexes along Burbank Boulevard to the stucco bungalows west of the 170 and the newer builds near the NoHo Arts District. The common thread is this: most of these gates are 30 to 40 years old, and they’re failing in ways that national chains don’t recognize because they don’t live here. We do. Hal’s crew knows that a gate sagging near Valley Plaza probably has a footing problem, not a hinge problem, and that matters when you’re deciding whether to weld or replace a post.

A live person answers the phone 24 hours a day, seven days a week. Not a voicemail, not a call center three states away. You call at 2 a.m. because your gate is stuck open on a busy street, you get Hal or someone on his crew who can actually tell you what to do and when we can get there.

Our Gate Parts & Welding Services in North Hollywood

We’re a Gate Parts & Welding shop first, which means we replace what’s actually broken and weld what can be saved. Half the time a gate gets condemned by another company, the real fix is one post, two hinges, and an honest weld. Here’s what we do most in North Hollywood.

Hinge Replacement

Hinges on a North Hollywood gate take a beating that hinges in Santa Monica never see. The Valley’s heat expands steel during the day and contracts it at night, and over 30 years that cycling work-hardens the hinge barrels until they crack or seize. We weld in new hinges on site, matching the existing barrel size and pin diameter so the gate swings clean without dragging the post. Most hinge replacements in North Hollywood run $180 to $420 depending on gate weight and whether we need to cut away rusted hardware first.

Post Replacement

This is the one service that separates North Hollywood from every other city we work in. A gate sags in the hinge post, not in the middle, and in North Hollywood the post is often sitting on a footing that cracked during the Northridge quake. That quake was epicentered just five miles west in Reseda, and we still find posts that haven’t been plumb since January 1994. Replacing the post means cutting out the old one, checking the footing, pouring new concrete when it’s shot, and welding the new post so it actually carries the gate weight instead of leaning on it. Post replacement typically runs $350 to $900 in North Hollywood depending on post size and footing condition.

Rail Repair

Slide gates on North Hollywood apartment complexes ride on a bottom rail that takes the full weight of the gate every time it cycles. When that rail bends or the rack teeth wear down, the gate jumps the track or binds mid-travel. We straighten rails when the steel is still sound and weld in new sections when it isn’t. On a 1980s garden-style complex off Lankershim Boulevard, our crew replaced a rusted hinge post on a tubular steel swing gate that had been sagging for years. The original post footing was cracked and shifted from the Northridge quake, so we cut out the old post, poured a new plumb footing, and welded a reinforced hinge post to match the existing rail before re-hanging the gate. That’s the difference between fixing the symptom and fixing the foundation.

Custom Welding

Sometimes the part doesn’t exist anymore. A 30-year-old gate with an obsolete operator bracket, a custom latching mechanism, or a rail that was never standard to begin with. We fabricate on site, in the driveway, with a mobile welder, so the gate stays in your driveway and the repair matches the existing steel profile. That matters on older North Hollywood properties where the gate was built to match the house and swapping in a mass-produced panel would look wrong.

Trusted Brands We Service in North Hollywood

We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In North Hollywood that usually means a 1990s DoorKing or an early-2000s LiftMaster that’s been running on borrowed time through every heat wave since. We keep common parts on the truck for these brands, and when a control board fails during a 105-degree stretch in July, we can usually get it swapped the same day rather than ordering from a warehouse in Ohio and hoping. If your gate has an operator someone else called obsolete, bring us the model number before you replace the whole system.

Common Gate Parts & Welding Problems We See in North Hollywood Homes

• Earthquake-shifted footings. The 1994 Northridge quake cracked concrete under thousands of gate posts across North Hollywood. Owners patched cosmetically and moved on, but 30 years later the gate still drifts, the hinges still bind, and the post still leans. Until the footing is addressed, every other repair is temporary.
• Heat-driven motor and control board failures. North Hollywood sits deep in the San Fernando Valley’s heat pocket, where summer temperatures routinely hit 100-110°F, 15-20 degrees hotter than coastal LA. Legacy control boards in older LiftMaster and DoorKing operators fail during those stretches, leaving multi-family gates stuck open or closed with no direct replacement part available. We retrofit modern boards and add cooling clearance where the old install didn’t leave any.
• Thermal expansion binding on tubular steel gates. Steel expands in 100-degree heat and contracts when the Valley cools at night. On a slide gate, that expansion binds the rack and pinion or bends the rail just enough to jump the track. Homeowners see it as a gate that works fine in winter and seizes every August.
• Worn or seized hinges on post-WWII bungalow gates. North Hollywood’s housing stock is heavy on 1940s-1960s stucco bungalows with wrought-iron or tubular steel driveway gates. Those hinges were never lubricated, never adjusted, and after 60 years they’re elliptical instead of round. Replacing them before the post wallers out saves the post.

Pricing for Gate Parts & Welding in North Hollywood, CA

We Also Serve Cities Near North Hollywood

While this page is written for Gate Parts & Welding in North Hollywood, our crews regularly run calls in Studio City, Van Nuys, Sherman Oaks, and West Hollywood. The drive is short, the traffic is familiar, and the same 90-Day Done Right Promise applies everywhere we go. If you’re just over the line in Valley Village or Toluca Lake, we’re still your local shop.

FAQs - Gate Parts & Welding in North Hollywood